Dielectric loss and electromagnetic absorption performance study of 1T/2H-MoS2/Mo2S3 nanocomposites with different ratios

High dielectric loss materials have an important application in electromagnetic (EM) absorption fields. In this paper, the ternary nanocomposites: 1T/2H-MoS₂/Mo₂S₃ with heterogeneous interfaces are synthesized by hydrothermal method. XRD, XPS, FTIR, SEM, and TEM measurements are applied to study the structure, morphology, and composition. The frequency spectra of complex permittivity (ε_r-f) are measured in 2–18 GHz by vector network analyzer. The results show that the nanocomposites have higher dielectric loss angle tangents than the reported 2H-MoS₂ absorbers. Based on the ε_r-f spectra, the reflection loss-frequency curves ($RL-f$) are simulated at given thicknesses. An effective absorption bandwidth of 5.2 GHz (12.8–18 GHz) and a $RL$ peak of −29.49 dB are achieved in a thin thickness of 1.62 mm, which are comparable to the reported 2H-MoS₂ absorbers with complex composition, showing that the 1T/2H-MoS₂/Mo₂S₃ nanocomposites have great application potential as an EM wave absorber in the K_u band.     

Human-to-metal electrostatic discharge current measurements – Notes on the ESD current waveform

The Electrostatic Discharge (ESD) phenomenon has been described through the IEC 61000-4-2. ESD current parameters' values, have been set in this Standard. The theoretical ESD current waveform defined in this standard, describing the conventional Contact discharge mode, needs to be re-evaluated on the basis of accurate experimental data. Even though the standard deals with commercial ESD generators, its goal is to simulate the natural phenomenon as good as possible. More and accurate data may contribute to the better simulation of the natural phenomenon. New values and better comprehension of the phenomenon demand new measurements based on high end measuring equipment. Such works and publications have been carried out the past years. Yet, the need to systematize and integrate this work remains. Larger and trust-worthy series of measurements need to be carried out and presented clearly.This paper deals with new ESD-current data, taken with broadband equipment. New and more detailed measurements like these, were never before taken at such a large number of individuals. The goal of this work is that the data acquired can serve as a basis for re-evaluating the conventional approach of the scientific community to the ESD event.In this paper, using a broadband measuring system, new parameters' values are measured and relations are presented, following standard statistical procedures. The results, which occur from measurements carried out on tenths of human individuals, are questioning the Standard in many points. A new way of approaching the standardization of the ESD current is proposed, as the excuse of the poor measuring equipment that sets barriers on the measuring accuracy, does not apply any more. The charging voltages of 500 V and 1000 V were also examined since such range of voltages are often met at ESD events and they are considered very harmful.     

强耦合腔-QED系统中原子的纳秒脉冲激发光谱研究

本文在多原子强耦合腔-QED系统中,利用脉冲宽度为5 ns的强脉冲光在垂直于腔轴方向直接激发原子,脉冲的峰值功率为40 mW,通过光学腔观测激发原子辐射到腔中的光子获得相应的激发光谱。我们发现当光场频率和原子跃迁失谐±80 MHz时原子激发率达到最大,而在共振时原子激发被抑制。我们建立了脉冲光与三能级原子相互作用的模型,通过缀饰态能够解释此现象。     

Oligonucleotide-Based Approaches to Inhibit Dengue Virus Replication

Dengue fever is one of the most common viral infections affecting humans. It is an expanding public health problem, particularly in tropical and subtropical regions. No effective vaccine or antiviral therapies against Dengue virus (DENV) infection are available. Therefore, there is a strong need to develop safe and effective therapeutic strategies that can reduce the burden and duration of hospitalizations due to this life-threatening disease. Oligonucleotide-based strategies are considered as an attractive means of inhibiting viral replication since oligonucleotides can be designed to interact with any viral RNA, provided its sequence is known. The resultant targeted destruction of viral RNA interferes with viral replication without inducing any adverse effects on cellular processes. In this review, we elaborate the ribozymes, RNA interference, CRISPR, aptamer and morpholino strategies for the inhibition of DENV replication and discuss the challenges involved in utilizing such approaches.     

Adaptive neuro-fuzzy interference system modelling for chlorpyrifos removal with walnut shell biochar

Accumulation of chlorpyrifos (CP), a pesticide, causes a significant environmental problem in food, surface/ground waters further to human health. The removal of the CP pollutant in surface/wastewater could be achieved by biochar due to the improved physical and chemical properties. In this work, the CP removal capacities of biochar samples derived from walnut shells at various temperatures from 450 to 900 °C were investigated. The experiments were performed as laboratory batch type study and the adsorption efficiency was determined at various conditions such as adsorbent dosage (10–500 mg/L), sorbate concentrations (100–1500 µg/L), contact time (0–300 min), initial pH (3–10), and the number of recycle.By subtracting the pyrolysis temperature from 450 °C to 900 °C, the surface areas were found to increase from 12.9 m²/g to 353.3 m²/g, respectively.The 143 experimental data were evaluated by a pair of kinetics and isotherm models and the Adaptive Neural Fuzzy Inference System (ANFIS). The developed ANFIS model was 98.56% successful in predicting the CP removal efficiency depending on the adsorption conditions. Walnut Shell Biochar (WSBC) can be applied for CP adsorption with 86.64% removal efficiency under optimum adsorption conditions (adsorbent = 250 µg/L, sorbate = 1000 µg/L, pH = 7.07 and contact time 15 min) thanks to its improved porosity. It was determined that the biochar samples could be reused 5 times. Equilibrium adsorption was observed to conform to the Langmuir isotherm, and the maximum adsorption capacity for WSBC@900 was 3.536 mg/g.     

Raman spectroscopic detection for liquid and solid targets using a spatial heterodyne spectrometer

Spatial heterodyne Raman spectroscopy (SHRS) is a new type of effective method for the analysis of structure and composition of liquid and solid targets with the characteristics of no moving parts, high spectral resolution, high optical throughput and large field of view. The technique is very suitable for detecting the targets from long distances or under the conditions with ambient light, which is essential for the exploration of planetary surface. In order to have a better understanding of the ability of SHRS for the detection of liquid and solid targets, a breadboard was designed, built and calibrated. Signal to noise was estimated at different integration time or laser power for carbon tetrachloride. Pure materials or materials contained in bottles were both tested. The mixture of organic liquids or inorganic solids were tested. In order to test the detection ability for natural targets, some composition‐unknown rocks and pebbles were tested. The results have shown that SHRS can meet the requirements for the detection of weak Raman signal scattered from artificial or natural targets. Standoff detection of sulfur from 5‐m or 10‐m distance without using any telescope or collimation optics was also tried to test the high optical throughput of SHRS. The potential feasibility of standoff detection has been proved. Copyright © 2015 John Wiley & Sons, Ltd.     

Sustained photon pulse revivals from inhomogeneously broadened spin ensembles

A very promising recent trend in applied quantum physics is to combine the advantageous features of different quantum systems into what is called “hybrid quantum technology”. One of the key elements in this new field will have to be a quantum memory enabling to store quanta over extended periods of time. Systems that may fulfill the demands of such applications are comb‐shaped spin ensembles coupled to a cavity. Due to the decoherence induced by the inhomogeneous ensemble broadening, the storage time of these quantum memories is, however, still rather limited. Here we demonstrate how to overcome this problem by burning well‐placed holes into the spectral spin density leading to spectacular performance in the multimode regime. Specifically, we show how an initial excitation of the ensemble leads to the emission of more than a hundred well‐separated photon pulses with a decay rate significantly below the fundamental limit of the recently proposed “cavity protection effect”.

     

具有Washer型输入线圈的超导量子干涉放大器的制备与表征

超导量子干涉仪(SQUID)放大器具有低输入阻抗、低噪声、低功耗等优点, 目前被广泛用于微弱信号的检测领域. 与其他工艺相比, Nb/Al-AlO_x/Nb结构的约瑟夫森结具有相对较高的转变温度(T_c)、高的磁通电压调制系数以及良好的热循环能力、较宽的临界电流范围, 因此是制备SQUID放大器的很好选择. 设计并制作了欠阻尼、过阻尼约瑟夫森结以及具有Washer型输入线圈的单SQUID放大器, 通过在He³制冷机3 K温区下对器件电流-电压特性进行测量, 得到良好的结I-V特性曲线、SQUID调制特性, 初步实现利用SQUID进行放大作用, 并计算了SQUID的电流分辨率. 此项工作对于超导转变边沿传感器读出电路的实现具有重要的意义.     

基于水声信道传播时延排序的分层空时信号检测

基于分层空时编码的多输入多输出技术是一种极具潜力的高速水声通信技术, 但要实现这种潜力需要复杂的空时信号处理方法, 以抵消来自水声信道的多径干扰和异步到达干扰, 以及叠加在接收端的各层信号之间的干扰. 对低复杂度的空时信号处理方案进行了研究, 提出了一种基于子信道传播时延排序的有序连续干扰抵消信号检测算法, 利用子信道间的传播时延差, 实现可使差错概率最小的最佳检测排序; 给出了利用信道估计, 以极低的计算量确定排序的方法, 从而可以大幅降低信号检测的计算复杂度. 采用低复杂度的单载波频域均衡来抵消水声信道中的码间干扰和异步到达干扰. 仿真结果表明, 基于时延排序的信号处理算法可以获得检测性能的改善, 而且性能增益在高数据率时更加显著. 研究结果表明, 采用有效的信号处理方法可使水声信道中造成信号检测干扰的传播时延成为改善系统性能的有利因素.